Earn 1% Brilliant Cash™ with purchase of this item. JTV Preferred Account cardholders earn 2%. Get Details About JTV Rewards
Add to Love List
JMKIT1241
Resin Kit Includes Appx 300g A Resin and Appx 100g B Resin Appx 400g Total
Jewel School Price:
$24.99
$32.99
Estimated Savings: $8.00
Or 2 payments of $12.49
- Product Videos
Video content about an item, including recorded programming, is offered only to provide information about the features of that item. It may not reflect present prices, promotional offers or availability.
Typically ships within 10 hours
Delivered in 2-3 business days
Delivered in 2-3 business days
Item total:
$24.99
Receive $50 in Brilliant Cash when you open a JTV Preferred Account and make your first qualifying order of $50 or more within 30 days!*. Ends 04/30/2024. Get Details About JTV Preferred Account
Product Information
Resin Kit Includes Appx 300g A Resin and Appx 100g B Resin Appx 400g Total
To utilize this resin you will be combining 3 parts epoxy with 1 part hardener. In order to ensure a proper measurement and mixture use a measuring tool of some kind (cup, spoon, etc.) (preferably from JMKIT1240 if you have purchased it as well!) and ensure you double check your measurements before combining the two portions of this resin mixture.
Once you have ensured the proper measurements of both parts combine them together in the same container and stir them together for approximately 1 minute to ensure a good consistent mixture. Once this has been done, freely pour / use the resin mixture however you want and start creating!
Resin setup will vary depending on the temperature and humidity. Check your resin setup after 24 hours and allow extra time if it has not hardened completely.
This should be used in a well ventilated area.
Helpful Hints: Preparation
Choose a workplace that is dust free.
Choose a surface that is flat and level - working on a level surface is important to ensure that your project does not tilt and/or cure at an angle.
Choose a workplace that is room temperature or greater (between 68 and 72 degrees Fahrenheit) - this will help reduce bubble and decrease cure times, as well.
Choose a workplace with good ventilation.
Wear Gloves - Wearing gloves will prevent you from an otherwise sticky situation.
Helpful Hints: Execution
Measure Twice, Mix Once - Ensuring your mixture is accurate is of the utmost importance. Measure twice before you mix to ensure the right balance each time.
Mix, Mix, and Mix some more - mixing your resin and hardener well is important to a successful outcome. Pro-Tip: While mixing keep your stir stick or spoon at the bottom of the mixing cup or bowl so you do not aerate (introduce air bubbles) into your mixture.
Bubbles are the worst - Sometimes bubbles will still find a way despite your best efforts. Here are a few options to get rid of them once you have poured your resin mixture:
Use a toothpick or stir stick to pop them before the resin cures.
Use a lighter or butane torch to alleviate them before the resin cures.
Patience is a virtue - checking your projects too early may result in accidentally disrupting the curing process and/or warping your project. If it hasn't fully cured in the first 24 hours, give it another 24 hours. Remember, the temperature and humidity will effect cure times.
Clean up early - Clean up your utensils, tools, and molds when you are done using them before your resin mixture hardens for a quick, easy clean up.
Pro-Tip: Use Scotch tape (or a similar product) to easily pick up dust, hair, and hardened resin shards from your silicon molds and working surfaces.
To utilize this resin you will be combining 3 parts epoxy with 1 part hardener. In order to ensure a proper measurement and mixture use a measuring tool of some kind (cup, spoon, etc.) (preferably from JMKIT1240 if you have purchased it as well!) and ensure you double check your measurements before combining the two portions of this resin mixture.
Once you have ensured the proper measurements of both parts combine them together in the same container and stir them together for approximately 1 minute to ensure a good consistent mixture. Once this has been done, freely pour / use the resin mixture however you want and start creating!
Resin setup will vary depending on the temperature and humidity. Check your resin setup after 24 hours and allow extra time if it has not hardened completely.
This should be used in a well ventilated area.
Helpful Hints: Preparation
Choose a workplace that is dust free.
Choose a surface that is flat and level - working on a level surface is important to ensure that your project does not tilt and/or cure at an angle.
Choose a workplace that is room temperature or greater (between 68 and 72 degrees Fahrenheit) - this will help reduce bubble and decrease cure times, as well.
Choose a workplace with good ventilation.
Wear Gloves - Wearing gloves will prevent you from an otherwise sticky situation.
Helpful Hints: Execution
Measure Twice, Mix Once - Ensuring your mixture is accurate is of the utmost importance. Measure twice before you mix to ensure the right balance each time.
Mix, Mix, and Mix some more - mixing your resin and hardener well is important to a successful outcome. Pro-Tip: While mixing keep your stir stick or spoon at the bottom of the mixing cup or bowl so you do not aerate (introduce air bubbles) into your mixture.
Bubbles are the worst - Sometimes bubbles will still find a way despite your best efforts. Here are a few options to get rid of them once you have poured your resin mixture:
Use a toothpick or stir stick to pop them before the resin cures.
Use a lighter or butane torch to alleviate them before the resin cures.
Patience is a virtue - checking your projects too early may result in accidentally disrupting the curing process and/or warping your project. If it hasn't fully cured in the first 24 hours, give it another 24 hours. Remember, the temperature and humidity will effect cure times.
Clean up early - Clean up your utensils, tools, and molds when you are done using them before your resin mixture hardens for a quick, easy clean up.
Pro-Tip: Use Scotch tape (or a similar product) to easily pick up dust, hair, and hardened resin shards from your silicon molds and working surfaces.
- Product Type
- Resin Kit
- Country of Origin
- China
- Material Type
- Resin
- Color
- Clear
- Piece Count
- 1
May We Recommend:
